Materials: H59, h63, H65, H68, H70, H80, h85, H90, H96, T1, T2, c1100, c5111, c5101, C5191, C5210, TU1, TP1, TP2, tag0.08, tag0.1, c1100, c1020, c1201, c1220, c1271, C2100, c2200, c2300, c2400, c2600, C2680, c2700, c2720, C2800, C2801, etc.

Specification: thickness: 1.0-200mm,

Width: 305-600mm.

Hardness: O, 1 / 2h, 3 / 4h, h, eh, SH, etc.

H59 ordinary brass; The price is the cheapest, the strength and hardness are high and the plasticity is poor, but it can still withstand pressure processing well in the hot state. The corrosion resistance is general, and other properties are similar to H62. Used for general machine parts, welding parts, hot stamping and hot-rolled parts.

H62 ordinary brass; It has good mechanical properties, good plasticity in hot state, good plasticity in cold state, good machinability, easy brazing and welding, corrosion resistance, but easy to produce corrosion cracking. In addition, the price is cheap, and it is a common brass variety used by recidivists. Used for all kinds of deep drawing and bending parts, such as pins, rivets, washers, nuts, conduits, barometer springs, screens, radiator parts, etc.

H63 ordinary brass; It is suitable for cold pressure machining, welding and brazing. Easy to polish, it is the main alloy for drawing, binding, bending and other forming. Used for screws, round rolls for pickling, etc.

H65 ordinary brass; The performance is between H68 and H62, and the price is cheaper than H68. It also has higher strength and plasticity, can withstand cold and hot pressure processing well, and has a tendency of corrosion cracking. Used for hardware, daily necessities, small springs, screws, rivets and mechanical parts.

H68 ordinary brass; It has extremely good plasticity (the best in brass) and high strength, good cutting performance, easy welding, non stable to general corrosion, but easy to crack. It is the most widely used variety of ordinary brass. Used for complex cold drawn parts and deep drawn parts, such as radiator shell, conduit, bellows, cartridge case, gasket, etc.

H70 is used for complex cold drawn parts and deep drawn parts, such as radiator shell, conduit, bellows, cartridge case and gasket.

H75 ordinary brass; It has quite good mechanical properties, process properties and corrosion resistance. It can be press processed well in hot and cold states. Between H80 and H70 in performance and economy. For low load corrosion-resistant springs.

H80 ordinary brass; Its properties are similar to those of h85, but it has high strength and plasticity. It has high corrosion resistance in atmosphere, fresh water and sea water. It is used for paper mesh, thin-wall pipe, corrugated pipe and building supplies.

H85 ordinary brass; It has high strength, good plasticity, can withstand cold and hot pressure processing, welding and corrosion resistance. It is used for condensing and radiating pipes, siphons, serpentine pipes and cooling equipment parts.

C3601 environmental protection copper, excellent cutting performance, excellent hot stamping, cold heading and ductility, good knurling, riveting performance and corrosion resistance. With high strength and toughness, it is widely used in electronic hardware processing industry, cutting and riveting various standard parts. It is widely used lead brass. It has good machinability, good mechanical properties, can withstand cold and hot pressure processing, is easy for fiber welding and welding, has good stability against general corrosion, but has corrosion cracking tendency. It has excellent cutting and drilling performance, high strength and strong corrosion resistance.